OUTDOOR WPC DECKING |
Senyu WPC material widely used in landscape road, garden, square, such as population agglomeration center and home decoration materials,due to the quality of the material itself has added a natural touch to modern cities.
As the saying goes, "three-point material seven is installed" even if the material is not well installed, there is no way to achieve better view.So how Senyu WPC Flooring is installed,the following is a reference to the installation methods and considerations of WPC flooring.
1、Before the construction of the wooden floor, make sure the concrete floor of the construction site is flat. This is very important, and I hope you don't try to do it for the sake of your convenience, or you will lose your money.
2、Keel of control center distance between 310—410 mm, keel end butt joints is about 10 mm spacing, facilitating drainage, At the same time, the joints between the keel and the line are staggered do not be on a straight line.The spacing of the keel allows the error < 10mm,flatness < 3mm, the expansion joint between metope is 8-10mm.
3、Construction site at the grassroots level construction ground condition is poor, cannot afford to stable structure, need to use steel keel instead of plastic wood keel, just used to use galvanized steel, welding the part of the link need to remove welding slag in the back seat antirust processing.
4、Floor splicing gap size, according to the temperature and humidity of the wood plastic floor installation environment, length of the floor, the floor moisture content, and the specific situation of laying area is reasonable and certain.
WPC Flooring Installation Notices:
1、Because of the density of wood material itself, the position of the tapping screw should be used for the drilling screw and the tightening of the self-tapping screw.
2、The requirement of the fixed keel: require the installation face to be flat, no potholes, the keel spacing L is 300mm ~ 350mm.
3、For a large area of wood plastic flooring, it is advisable to use the graphic installation method, the length of each wooden floor is no more than two meters.
4、Sealing side handle.
5、For the shop of curve wood plastic floor, need according to the length of the curve and angle pair of each piece of wood plastic floor to be cut and shop again.
6、The wooden flooring of the steps are laid out ,the balcony of the step suggests use metal pressure bar to the wpc flooring to protect.
7、In the process of use, please avoid the impact or collision of heavy objects. In the storage, transportation and installation of materials, please be careful to avoid it from falling a height.